Stress relaxation of a viscoelastic tube: viscoTube

Prepared by Philip Cardiff and Ivan Batistić

Tutorial Aims

• Demonstrate a transient viscoelastic analysis;
• Compare viscoelastic predictions with a reference finite element solution.

Case Overview

This case consists of a tube constructed from a viscoelastic material [1], where the inner surface is quickly displaced in the radial direction; subsequently, the tube relaxes towards a steady state after initially experiencing high wall stresses. The case is modelled as 2-D with quarter symmetries, as schematically shown in Figure 1. The cylindrical tube has an inner radius of \(5\) mm and an outer radius of \(10\) mm. The tube material is assumed to be a viscoelastic polymer where a Prony series represents its deviatoric response, and its bulk/volumetric response is assumed to be elastic. The mechanical parameters for the Prony series Maxwell models are given in Table 1.

Table 1: Viscoelastic mechanical properties given in terms of a Prony series

The inner surface of the tube is displaced \(1\) µm in the radial direction. To mimic the displacement occurring instantaneously, it is applied within the first time step. The outer surface of the tube is traction-free. The case is solved over a period of \(7000\) s with a time step of \(800\) s. Inertia and gravity terms are neglected, and the problem is solved as a plane strain. The cylinder is discretised with \(1,152\) cells: \(24\) cells in the radial direction and \(48\) cells in the circumferential direction.

Expected Results

In Cardiff et al. [1], the predicted radial stress and radial displacement on the inner tube surface are compared with results from commercial finite element software Abaqus. To illustrate the effect of loading increment size on the employed material law integration, four separate time step sizes are examined (\(700\), \(350\), \(175\), and \(87.5\) s). From Figure 2, one can see that the predicted stresses and displacements are relatively insensitive to time-step size. As the step size is reduced, the predictions are seen to approach the reference finite element solution ("Abaqus FE").

The above plots can be easily reproduced using post-processing function objects added to controlDict. For the chosen point in the domain, the solidPointStress function object is used to write the corresponding stress tensor and the solidPointDisplacement fuction object to write displacement values.

functions
{
    pointStressSymmy
    {
        type    solidPointStress;
        point   (0.0075 0 0);
    }
    pointStressSymmx
    {
        type    solidPointStress;
        point   (0 0.0075 0);
    }
    pointDisp
    {
        type    solidPointDisplacement;
        point   (0.0075 0 0);
    }
}

Running the Case

The tutorial case is located at solids4foam/tutorials/solids/viscoelasticity/viscoTube. The case can be run using the included Allrun script, i.e. > ./Allrun. In this case, the Allrun creates the mesh using blockMesh (> blockMesh) followed by solids4Foam solver (> solids4Foam).

References

[1] P. Cardiff, A. Karač, P. De Jaeger, H. Jasak, J. Nagy, A. Ivanković, and Ž. Tuković, "An open-source finite volume toolbox for solid mechanics and fluid-solid interaction simulations," arXiv preprint arXiv:1808.10736, 2018.