Optional fixes for the OpenFOAM installation

As described below, there are different optional fixes depending on whether you are using OpenFOAM.org, OpenFOAM.com, or foam-extend.

OpenFOAM.com

  • GeometricField.C: this fix is required for consistent time discretisation. Some FSI cases may crash without this fix.

  • backwardDdtScheme.C: this corrects the scheme for a moving mesh, for example, for the fluid domain in a fluid-solid interaction simulation.

OpenFOAM.com

  • backwardDdtScheme.C: this corrects the scheme for a moving mesh, for example, for the fluid domain in a fluid-solid interaction simulation.

foam-extend

  • EulerDdtScheme.C: This corrects the scheme for a moving mesh, for example, for the fluid domain in a fluid-solid interaction simulation.

  • GeometricField.C: this fix is required for consistent time discretisation. Some FSI cases may crash without this fix.

  • meshObjectBase.H: without this fix, all runs will end in a segmentation. The solids4foam solver will work correctly; however, you may like to fix this if you plan to catch the return valve from the solver.

  • pointBoundaryMesh.C: without this fix, cases involving topological mesh changes will have a segmentation fault. For example, when using crackerFvMesh.